Part Number | 45005 |
Process Time | Archival, 5 1/2 minutes. "Quick-look" Endo
periapical films, 2 1/2minutes |
Chemistry Replenishment | At initial Power On, 4 1/4oz. in 90 seconds. Every
12 3/4" linear film, 1 2/3 oz. in 35 seconds |
Electrical | 115V, 60Hz, 8A. Use 3 prong grounded outlet. Dedicated 15 amp line recommended |
Water Flow | 1/2 gallon/minute when processing film. Do not
use water softeners |
Water Pressure | 80 psi max. / 30 psi min. Manual shut-off required
near processor |
Water Connection | 1/2" female NP and 3/4" male garden hose adapters provided. A 6' long water supply hose is provided to connect to the rear of the processor |
Water Backflow Prevention | Vacuum breaker not required. Processor has a 1" air gap between water supply inlet and top of highest
water level in processor |
Water Temperature | Mixing valve not required if water temperature is between 55 degree F (13 degrees C) to 80 degrees
F (27 degrees C) |
Drain | Use 1 1/2" diameter vertical PVC standpipe, open at top, connected to 1 1/2" PVC trap. Top of standpipe must be 6" below bottom of counter top. DO NOT DRAIN INTO COPPER OR BRASS. Ventilation: Room air must not exceed 80 degrees F
(27 degrees C) during processing. Processing
generates heat. Adequate ventilation of 10 air
changes per hour is necessary to maintain darkroom temperature |
Dimensions (HxWxD) | 18"x15"x25" with leveling base. With Daylight
loader, 18"x16.25"x39"; Daylight Loader extends additional 10.25" below counter top |
Weight | 90lbs with water and chemistry, 75lbs empty |
